A) EAP authentication
B) 802.1X machine authentication
C) MAC authentication
D) 802.1X user authentication
Correct Answer
verified
Multiple Choice
A) Channel 1
B) Channel 6
C) Channel 11
D) Channel 14
Correct Answer
verified
Multiple Choice
A) Map the four physical ports to port channel 0.
B) Disable spanning tree and allocate unique VLANs to each port.
C) Manually set 10Gbps speeds on all ports.
D) Configure the same MSTP region that the switches have.
E) Make all ports trunk interfaces and permit data VLANs.
Correct Answer
verified
Multiple Choice
A) 2.4Ghz band is currently congested, therefore a NIC upgrade to 802.11ac or higher is recommended so the user can move to 5Ghz.
B) Channel usage is high and though this device has high speed the overall client rate is low on AP-Garden, there could be a few clients monopolizing the airtime on both bands at low speeds.
C) User's SNR value over time is lower than recommended, therefore he should either get closer to the Access Point or increase the transmit power.
D) 365s are low cost outdoor APs recommended for coverage design only. AP-Garden currently has more clients than recommended and is getting congested.
Correct Answer
verified
Multiple Choice
A) server group and ssid profile
B) server group and VAP profile
C) server group, aaa profile, and ssid profile
D) server group and VAP
Correct Answer
verified
Multiple Choice
A) a two-member HA group in dual mode
B) an eight-member L2-connected cluster
C) two four-member L2-connected clusters
D) an eight-member HA group in dual mode
Correct Answer
verified
Multiple Choice
A) ![]()
B) ![]()
C) ![]()
D) ![]()
E) ![]()
Correct Answer
verified
Multiple Choice
A) Place the APs in the same hierarchy level.
B) Create a cluster with AP load balancing.
C) Enable oversubscription in the HA group.
D) Add an MC and an MM in the server farm.
E) Add an MM and enable DC redundancy.
F) Place the APs in two different AP-Groups.
Correct Answer
verified
Multiple Choice
A) ![]()
B) ![]()
C) ![]()
D) ![]()
E) ![]()
Correct Answer
verified
Multiple Choice
A) ClearPass.23 is the authentication server, and cp.mycompany.com is the captive portal server.
B) ClearPass.23 is the authentication server, and MC2 is the captive portal server.
C) Internal database in MC2 is the authentication server, and cp.mycompany.com is the captive portal server.
D) cp.mycompany.com is the authentication server, and ClearPass.23 is the captive portal server.
Correct Answer
verified
Multiple Choice
A) Permit UDP67 to the contractor role.
B) Remove the IP address in VLAN 40.
C) Configure the DHCP helper address.
D) Confirm there is an IP pool for VLAN 40.
Correct Answer
verified
Multiple Choice
A) Enable WMM in a VAP profile, and explicitly permit voice and video UDP ports in a firewall policy.
B) Confirm OpenFlow is enabled in the user role and VAP profile. Then enable WMM in a SSID profile, and explicitly permit voice and video UDP ports in a firewall policy.
C) Confirm the MC is the Openflow controller of the MMs and Openflow is enabled in VAP and firewall roles. Enable Skype4Business ALG in UCC profiles.
D) Confirm MM is the Openflow controller of MCs and Openflow is enabled in VAP and firewall roles. Enable Skype4Business ALG in UCC profiles.
Correct Answer
verified
Showing 21 - 32 of 32
Related Exams