Filters
Question type
Study Flashcards

You have completed a successful VSF stack between two switches. Without manually assigning a backup switch, what is the expected output when issuing a show vsf command?


A) You have completed a successful VSF stack between two switches. Without manually assigning a backup switch, what is the expected output when issuing a show vsf command? A) B) C) D)
B) You have completed a successful VSF stack between two switches. Without manually assigning a backup switch, what is the expected output when issuing a show vsf command? A) B) C) D)
C) You have completed a successful VSF stack between two switches. Without manually assigning a backup switch, what is the expected output when issuing a show vsf command? A) B) C) D)
D) You have completed a successful VSF stack between two switches. Without manually assigning a backup switch, what is the expected output when issuing a show vsf command? A) B) C) D)

E) B) and D)
F) All of the above

Correct Answer

verifed

verified

Which command will suppress LLDP messages from egressing on a given port while still allowing LLDP to be enabled on the switch?


A) switch(config-if) # no lldp interface (port) transmit switch(config-if) # no lldp interface (port) transmit
B) switch(config-if) # no lldp transmit no lldp transmit
C) switch(config-if) # no lldp receive no lldp receive
D) switch(config) # no lldp switch(config) # no lldp

E) A) and B)
F) None of the above

Correct Answer

verifed

verified

What are two features of the three-tier designs? (Choose two.)


A) removes the distribution layer in favor of a spine-leaf design used in modern data center deployments
B) adds a distribution layer to free up resources from the Core for improved performance and routing throughput
C) a more scalable design over by leveraging a distribution layer to handle Layer 3 routing and access control in large deployments
D) uses only Layer 2 access on the Access and the Core with Layer 3 routing and access control provided at the distribution layer
E) is considered legacy by requiring a large flat layer-two broadcast domain from Core to Access and should be avoided

F) None of the above
G) C) and D)

Correct Answer

verifed

verified

What is an available command on an Aruba AOS-CX switch that would back up the secondary image to a secure remote repository?


A) backup secondary sftp://admin@10.1.1.21/GL.10.04.0003.swi
B) copy secondary sftp://admin@10.1.1.21/GL.10.04.0003.swi
C) copy sftp://admin@10.1.1.21/GL.10.04.0003.swi secondary
D) copy secondary tftp://admin@10.1.1.21/GL.10.04.0003.swi

E) A) and D)
F) None of the above

Correct Answer

verifed

verified

What is true about VSX? (Choose two.)


A) VSX is ideal for Campus access layer deployments where ease of deployment is needed.
B) VSX allows upgrading members with near zero downtime or loss of packets.
C) VSX is available on all Aruba OS-CX switches except the 6300F model.
D) VSX is implemented on static port switches. VSX-plus needed to stack chassis together.
E) VSX run separate control planes to reduce latency and improve performance.

F) B) and C)
G) A) and B)

Correct Answer

verifed

verified

What is the process where a compute device converts logical data bits into the correct physical representation depending on the media?


A) Demodulation
B) Modulation
C) Propagation
D) Encapsulation

E) All of the above
F) A) and B)

Correct Answer

verifed

verified

Refer to the exhibit. Refer to the exhibit. The Aruba 8400 in the exhibit is member 2 of a VSX stack. Which command will enter the interface sub configuration mode for the port, indicated by the orange square? A) 8400(config) # interface 2/4/15 B) 8400(config) # interface 1/7/16 C) 8400(config) # interface 1/4/15 D) 8400(config) # interface 2/3/17 The Aruba 8400 in the exhibit is member 2 of a VSX stack. Which command will enter the interface sub configuration mode for the port, indicated by the orange square?


A) 8400(config) # interface 2/4/15
B) 8400(config) # interface 1/7/16
C) 8400(config) # interface 1/4/15
D) 8400(config) # interface 2/3/17

E) B) and C)
F) A) and C)

Correct Answer

verifed

verified

Which two options are correct regarding the IEEE 802.11ax standard? (Choose two.)


A) allows transmissions of up to 4.8Gbps
B) is an emerging satellite connection standard to allow wireless access anywhere in the world
C) operates only in the 5GHz similar to 802.11ac
D) operates in both the 2.4GHz and 5GHz radios bands
E) is the first WLAN standard to no longer use electromagnetic signals to transmit data

F) B) and E)
G) B) and D)

Correct Answer

verifed

verified

The customer has 778 developers testing computer games on the network. Which two actions resolve Broadcast storms? (Choose two.)


A) Manually disable the redundant link to immediately resolve the impacted portion of the network.
B) Utilize Spanning Tree to dynamically disable all redundant links in a segment.
C) Setting switch ports to half-duplex will resolve Broadcast storms using Carrier Sense Multiple-Access Collision Detection (CSMA/CD) .
D) Enable single Area Open Shortest Path First (OSPF) on all Layer 2 switches, but do not enable routing.
E) Utilize Spanning Tree to dynamically block Designated ports in addition to Alternate ports.

F) B) and D)
G) A) and E)

Correct Answer

verifed

verified

Which two options are the Layer 3 Routing protocols? (Choose two.)


A) BGP
B) LLDP
C) OSPF
D) MPLS
E) 802.3ad

F) B) and E)
G) A) and D)

Correct Answer

verifed

verified

Which statement is true regarding modern switching requirements?


A) Most older legacy switches had high port bandwidth utilization and were future proof designed to meet today's power-over-Ethernet needs.
B) Requirements for PoE are normally addressed using AC to DC power adapters. Concerns for port security for IoT devices are usually addressed using default wired encryption that all 802.3 Ethernet switches provide.
C) While APs are common, most clients are still docked and only require traditional wired connections with only the occasional dedicated PoE switch to provide power for the low number of devices needed.
D) Clients tend to prefer wireless connections, raising the need for PoE port access. There is also a growing amount of IoT devices that require security and port authentication options.

E) B) and C)
F) A) and D)

Correct Answer

verifed

verified

Which two statements accurately describe the features of NetEdit? (Choose two.)


A) NetEdit can be used to configure and validate any third-party device that supports SSH and REST access.
B) NetEdit includes trial licensing for up to 10 nodes.
C) NetEdit can perform configuration and compliance validation.
D) NetEdit supports viewing and editing multiple devices using a single deployment plan.
E) NetEdit can run on a mobile device using Android or Apple IOS.

F) A) and C)
G) B) and D)

Correct Answer

verifed

verified

What is the correct description of a Multi-Layer Switch?


A) a switch with Layer 3 routing capabilities but lacks any Layer 1 features as a consequence
B) any switch that supports PoE, LLDP-MED and Flow Control
C) has all the functionality of a Layer 2 switch and most of the functionality of a Layer 3 router
D) multi-Layer refers specifically to using chassis switches with several line cards over stack port switches

E) B) and D)
F) A) and D)

Correct Answer

verifed

verified

Refer to the exhibit. Refer to the exhibit. The above scenario shows a packet from the Server destined for the Firewall. Switch-A and Switch-B are bundled as VSF stack. The LAG between the VSF stack and the firewall indicates a hash function to forward the packet on port 2/1/2. Which statement is true regarding how Switch-A will forward the packet? A) Switch-A will forward the packet on port 1/1/2. VSF will override the typical LAG hash function used for the physical interface selection. B) Switch-A will drop the packet. Multi-Chassis lag to multi-chassis lag is not a supported feature of VSF. C) Switch-A will encapsulate the packet using GRE to forward to Switch-B in order for the packet to egress on port 2/1/2 per the hash function. D) Switch-A will forward the packet along the VSF link to Switch-B so that it will egress on port 2/1/2 per the hash function. The above scenario shows a packet from the Server destined for the Firewall. Switch-A and Switch-B are bundled as VSF stack. The LAG between the VSF stack and the firewall indicates a hash function to forward the packet on port 2/1/2. Which statement is true regarding how Switch-A will forward the packet?


A) Switch-A will forward the packet on port 1/1/2. VSF will override the typical LAG hash function used for the physical interface selection.
B) Switch-A will drop the packet. Multi-Chassis lag to multi-chassis lag is not a supported feature of VSF.
C) Switch-A will encapsulate the packet using GRE to forward to Switch-B in order for the packet to egress on port 2/1/2 per the hash function.
D) Switch-A will forward the packet along the VSF link to Switch-B so that it will egress on port 2/1/2 per the hash function.

E) A) and B)
F) C) and D)

Correct Answer

verifed

verified

Showing 21 - 34 of 34

Related Exams

Exam 1

Designing Multi-Site HPE Storage Solutions

148 Questions

Exam 2

HPE Storage Solutions

94 Questions

Exam 3

Configuring HPE GreenLake Solutions

95 Questions

Exam 4

Architecting Advanced HPE Server Solutions

92 Questions

Exam 5

Designing HPE Server Solutions

83 Questions

Exam 6

Delta - Designing HPE Server Solutions

123 Questions

Exam 7

Designing HPE Hybrid IT Solutions

80 Questions

Exam 8

Implementing HPE Composable Infrastructure Solutions

25 Questions

Exam 9

Designing HPE Software-Defined Infrastructure Solutions

43 Questions

Exam 10

Building HPE Hybrid IT Solutions

71 Questions

Exam 11

Designing HPE Nimble Solutions

78 Questions

Exam 12

Using HPE OneView

54 Questions

Exam 13

Selling Aruba Products and Solutions

36 Questions

Exam 14

Designing Aruba Solutions

14 Questions

Exam 15

Aruba Certified Design Associate

34 Questions

Exam 16

Aruba Certified ClearPass Professional (ACCP) V6.7

40 Questions

Exam 17

Aruba Certified Mobility Associate Exam

72 Questions

Exam 18

Aruba Certified Mobility Professional Exam

23 Questions

Exam 19

Aruba Certified Switching Associate

98 Questions

Exam 21

Aruba Certified Mobility Expert Written Exam

32 Questions

Exam 22

HPE Sales Certified - Aruba Products and Solutions

36 Questions

Show Answer